Annex IV: exemptions specific to medical devices and monitoring and control instruments

This annex has 54 entries with their own page. Open one to see its scope and the dates as the annex words them.

• RoHS Annex IV 1 Lead, cadmium and mercury in detectors for ionising radiation.
• RoHS Annex IV 2 Lead bearings in X-ray tubes.
• RoHS Annex IV 3 Lead in electromagnetic radiation amplification devices: micro-channel plate and capillary plate.
• RoHS Annex IV 4 Lead in glass frit of X-ray tubes and image intensifiers and lead in glass frit binder for assembly of gas...
• RoHS Annex IV 5 Lead in shielding for ionising radiation.
• RoHS Annex IV 6 Lead in X-ray test objects.
• RoHS Annex IV 7 Lead stearate X-ray diffraction crystals.
• RoHS Annex IV 8 Radioactive cadmium isotope source for portable X-ray fluorescence spectrometers.
• RoHS Annex IV 1a Lead and cadmium in ion selective electrodes including glass of pH electrodes.
• RoHS Annex IV 1b Lead anodes in electrochemical oxygen sensors.
• RoHS Annex IV 1c Lead, cadmium and mercury in infra-red light detectors.
• RoHS Annex IV 1d Mercury in reference electrodes: low chloride mercury chloride, mercury sulphate and mercury oxide.
• RoHS Annex IV 9 Cadmium in helium-cadmium lasers.
• RoHS Annex IV 10 Lead and cadmium in atomic absorption spectroscopy lamps.
• RoHS Annex IV 11 Lead in alloys as a superconductor and thermal conductor in MRI.
• RoHS Annex IV 12 Lead and cadmium in metallic bonds creating superconducting magnetic circuits in MRI, SQUID, NMR (Nuclear...
• RoHS Annex IV 13 Lead in counterweights.
• RoHS Annex IV 14 Lead in single crystal piezoelectric materials for ultrasonic transducers.
• RoHS Annex IV 15 Lead in solders for bonding to ultrasonic transducers.
• RoHS Annex IV 16 Mercury in very high accuracy capacitance and loss measurement bridges and in high frequency RF switches...
• RoHS Annex IV 17 Lead in solders in portable emergency defibrillators.
• RoHS Annex IV 18 Lead in solders of high performance infrared imaging modules to detect in the range 8-14 μm.
• RoHS Annex IV 19 Lead in Liquid crystal on silicon (LCoS) displays.
• RoHS Annex IV 20 Cadmium in X-ray measurement filters.
• RoHS Annex IV 21 Cadmium in phosphor coatings in image intensifiers for X-ray images until 31 December 2019 and in spare...
• RoHS Annex IV 22 Lead acetate marker for use in stereotactic head frames for use with CT and MRI and in positioning systems...
• RoHS Annex IV 23 Lead as an alloying element for bearings and wear surfaces in medical equipment exposed to ionising radiation.
• RoHS Annex IV 24 Lead enabling vacuum tight connections between aluminium and steel in X-ray image intensifiers.
• RoHS Annex IV 25 Lead in the surface coatings of pin connector systems requiring nonmagnetic connectors which are used...
• RoHS Annex IV 26 Lead in the following applications that are used durably at a temperature below - 20 °C under normal...
• RoHS Annex IV 27 Lead in - solders, - termination coatings of electrical and electronic components and printed circuit...
• RoHS Annex IV 28 Lead in solders for mounting cadmium telluride and cadmium zinc telluride digital array detectors to...
• RoHS Annex IV 29 Lead in alloys, as a superconductor or thermal conductor, used in cryo-cooler cold heads and/or in...
• RoHS Annex IV 30 Hexavalent chromium in alkali dispensers used to create photocathodes in X-ray image intensifiers until 31...
• RoHS Annex IV 31a Lead, cadmium, hexavalent chromium, and polybrominated diphenyl ethers (PBDE) in spare parts recovered...
• RoHS Annex IV 32 Lead in solders on printed circuit boards of detectors and data acquisition units for Positron Emission...
• RoHS Annex IV 33 Lead in solders on populated printed circuit boards used in Directive 93/42/EEC class IIa and IIb mobile...
• RoHS Annex IV 34 Lead as an activator in the fluorescent powder of discharge lamps when used for extracorporeal...
• RoHS Annex IV 35 Mercury in cold cathode fluorescent lamps for back-lighting liquid crystal displays, not exceeding 5 mg...
• RoHS Annex IV 36 Lead used in other than C-press compliant pin connector systems for industrial monitoring and control...
• RoHS Annex IV 37 Lead in platinized platinum electrodes used for conductivity measurements where at least one of the...
• RoHS Annex IV 38 Lead in solder in one interface of large area stacked die elements with more than 500 interconnects per...
• RoHS Annex IV 39 Lead in micro-channel plates (MCPs) used in equipment where at least one of the following properties is...
• RoHS Annex IV 40 Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC for...
• RoHS Annex IV 41 Lead as a thermal stabiliser in polyvinyl chloride (PVC) used as base material in amperometric...
• RoHS Annex IV 41a Lead as a thermal stabilizer in polyvinyl chloride (PVC) used as base material in amperometric...
• RoHS Annex IV 42 Mercury in electric rotating connectors used in intravascular ultrasound imaging systems capable of high...
• RoHS Annex IV 43 Cadmium anodes in Hersch cells for oxygen sensors used in industrial monitoring and control instruments...
• RoHS Annex IV 44 Cadmium in radiation tolerant video camera tubes designed for cameras with a centre resolution greater...
• RoHS Annex IV 45 Bis(2-ethylhexyl) phthalate (DEHP) in ion-selective electrodes applied in point of care analysis of ionic...
• RoHS Annex IV 46 Bis(2-ethylhexyl) phthalate (DEHP) in plastic components in MRI detector coils.
• RoHS Annex IV 47 Bis(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), dibutyl phthalate (DBP) and diisobutyl...
• RoHS Annex IV 48 Lead in bismuth strontium calcium copper oxide (BSCCO) superconductor cables and wires and lead in...
• RoHS Annex IV 49 Mercury in melt pressure transducers for capillary rheometers at temperatures over 300 °C and pressures...